3DGence DT3 Manuel - Sayfa 11

3D Yazıcılar 3DGence DT3 için çevrimiçi göz atın veya pdf Manuel indirin. 3DGence DT3 14 sayfaları.

Troubleshooting

• Check that the suction strainer and the manifold

jets are clear of debris per the maintenance

instructions.

Controller display reads...

• Er4: Please contact 3DGence.

• Er5: Please contact 3DGence.

Machine will not stay running

• Check that the water level is 2.54cm from the top

of the tank.

• Check that the suction strainer and the manifold

jets are clear of debris per the maintenance

instructions.

Technical support

• If the 3DGence DT3 is no longer under warranty

and no service contract has been purchased, there

may be a charge for tech support calls. Customers

will be made aware of these charges at the time of

the call.

• World Wide Web URL:

http://www.3dgence.com/contact/

3DGence DT3

Jet action cleaning