CAME FROG-PM4 Kurulum Kılavuzu - Sayfa 14
Garaj Kapısı Açıcı CAME FROG-PM4 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. CAME FROG-PM4 19 sayfaları. Swing-gate operator
Ayrıca CAME FROG-PM4 için: Kurulum Kılavuzu (13 sayfalar), Kurulum Kılavuzu (17 sayfalar), Kullanım Kılavuzu (12 sayfalar)

Safety instructions
Important general safety instructions
This product is only intended to be used for the purpose it was designed. Any other use is therefore improper and dangerous. The
manufacturer is not liable for any damage caused by improper, wrongful or unreasonable use.
Work well away from the gate hinges or mechanical moving parts.Stay out of the working range of the moving operator.
Do not oppose the operator's movement as this could result in a hazard.
Do not allow children to play to loiter within the working range of the operator. Keep transitters and any other command devices
away from children, to prevent the operator from being activated y mistake.
Immediately stop using the operator if any anomaly is manifested.
Danger of hand crushing
Danger of foot crushing
Maintenance
Periodic maintenance
The periodic maintenance actions to be done by the end users are: clean photocell glass;check proper working order of
safety devices;remove any obstacles to the proper working order;
We suggest to periodically check lubrication and tightness of fastneing screws on the operator.
To check efficiency of the safety devices, wave an object in front of the photocells during closing movement phase.If the operator
inverts movement or blocks itself, the photocells are working properly.
This is the only maintenance operation to do when the gate is powered up.
Before any maintanence jobs, cut off the main power, to prevent any potentially hazardous accidental movements of the device.
Use a barely water-dampened cloth to clean the photocell glass.Do not use solvents or other chemical agents that could ruin the
devices.
For any strange vibrations, lubricate all joints with grease, as shown in the figure below.
Danger high voltage
Transit forbidden during operation