CAME FROG-PM4 Kurulum Kılavuzu - Sayfa 5

Garaj Kapısı Açıcı CAME FROG-PM4 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. CAME FROG-PM4 17 sayfaları. Swing-gate operator
Ayrıca CAME FROG-PM4 için: Kurulum Kılavuzu (19 sayfalar), Kurulum Kılavuzu (13 sayfalar), Kullanım Kılavuzu (12 sayfalar)

Sayfayı Yazdır

Example of a system

1. Gearmotor with foundation box

2. Control panel

3. Junction box

4. Key selector

5. Antenna

6. Flashing light

7. Photocells

8. Photocell posts

9. Latch

10. Inspection chamber

11. Drainage chamber

12. Mechanical stop

GENERAL INSTALLATION INSTRUCTIONS

⚠ Installation must be carried out by qualified and experienced personnel in compliance with applicable regulations.

Preliminary checks

⚠ Before installing the operator:

• Provide a suitable single-pole disconnection device, with a maximum of 3 mm between the contacts, to disconnect the power supply;

• Prepare suitable piping and ducts for routing the electrical cables, ensuring protection against mechanical damage;

• Prepare a drain pipe to prevent stagnation that may cause oxidation;

•

Make sure that any connections within the container (made to ensure the continuity of the protection circuit) are fitted with additional insulation

compared to the other internal conductor parts;

• Make sure the gate structure is sturdy enough, that the hinges are in proper working order and that there is no friction between the moving and fixed parts;

• Make sure there are opening and closing mechanical stops.