3DHobbyShop.com Vyper 46" ARF Montaj Kılavuzu - Sayfa 8

Oyuncak 3DHobbyShop.com Vyper 46" ARF için çevrimiçi göz atın veya pdf Montaj Kılavuzu indirin. 3DHobbyShop.com Vyper 46" ARF 19 sayfaları.

FUSELAGE FRONT ASSEMBLY

Take THIN CA glue and go over the motor mount area and landing-gear mount area, applying a small

amount of glue to all the seams. This is the highest-stress area of the airframe, and we want to make it

as strong as possible.

Your airplane includes a pre-drilled firewall with pre-installed blind nuts that fit Omega, Torque, Reaper,

Hacker, and other popular brands of brushless motors. If your brand of motor uses a different bolt

pattern, use your hobby knife to carefully remove the blind nuts and plywood circle spacers from the back

of the firewall, and then re-drill the firewall for your motor.

Assemble brushless outrunner motor as shown for mounting in front of the firewall surface. The prop

adaptor should be on the OPPOSITE side of the motor from the mount.