Acoustic Research AWS73 Kurulum ve Kullanım Kılavuzu - Sayfa 6
Konuşmacılar Acoustic Research AWS73 için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Kılavuzu indirin. Acoustic Research AWS73 8 sayfaları. Portable wireless speaker with 3.5mm jack
Sayfayı Yazdır
1. Press the On-Off button on the back of the speaker to turn the speaker off.
2. Confi rm that the speaker is off by verifying that the indicator light on the speaker's back
The following troubleshooting guide takes you through some of the more common problems
associated with the installation and/or operation of a wireless system. If the problem persists,
please call toll-free at 1-800-732-6866 or visit www.acoustic-research.com.
DO NOT
connect it
Turning the Speaker Off
panel is no longer illuminated.
Troubleshooting
Issue:
Cause and solution:
No sound
• Check that the transmitter AC power adapter is fully inserted into the wall outlet
and the power cord from the AC adapter is fi rmly connected to the transmitter
power input jack.
• Confi rm that the speaker is turned on and tuned to the transmitter—the indicator
light on the back of the speaker should be solid blue (not blinking).
• If you're using the power adapters, confi rm that both (for the speaker and for the
transmitter) are fully inserted into their wall outlets and the adapter power cords
are fi rmly connected to the power input jacks on the transmitter or speaker.
or
• If you're using batteries for the speaker, check that they are fresh and inserted
with correct polarity (+, –).
• Check that the audio source component (stereo, MP3 player, etc.) is turned on and
transmitting sound as it normally should.
• Make sure the volume on your audio source is turned up.
• Check that the speaker volume is turned up.
• If you are using a Tape 2 Monitor output from your receiver/amp as the audio
output, check that you have pressed the Tape Monitor/Tape 2 button on the front
of the receiver. This will turn on the Tape 2 outputs, which may not have been
active.
Issue:
Cause and solution:
Sound is
• When using battery power, make sure the batteries are fresh and replace if
distorted or
necessary.
has static
• Check that the speaker's indicator light is solid blue (not blinking) when an audio
source is connected to the transmitter
• Change the position of the channel select switch (1, 2 or 3) to change the
operating frequency. Then press the AutoScan button on the speaker's back panel
to make the speaker retune.
• Change the location of the transmitter. Place it as high and away from
obstructions as possible. Avoid placing the transmitter directly on top of or behind
a TV.
• Move the transmitter and speaker closer together. Sending the signal through
certain materials, such as glass, tile, and metal, can decrease the effective
transmitting distance of the system.
Specifi catio
Transmitter
• Omni-directional 900MHz broadcast
• Effective transmitting range: up to 15
• Phase-locked loop circuitry (PLL)
• 3 selectable broadcast frequencies
• Stereo audio input
*Maximum range; results may vary acc
environment.
FCC Statement
This device complies with Part 15 of the FCC
1) This device may not cause harmful interfe
interference that may cause undesired ope
This equipment has been tested and found
the FCC Rules. These limits are designed to
if not installed and used in accordance with
However, there is no guarantee that interfe
harmful interference to radio or television r
on, the user is encouraged to try to correct
•
Reorient or relocate the receiving ant
•
Increase the separation between the e
•
Connect the equipment into an outlet
•
Consult the dealer or an experienced
Caution: Any changes or modifi cations not
user's authority to operate this equipment.
Industry Canada Regulatory
This device complies with RSS-210 of the In
this device may not cause interference and
cause undesired operation of the device.
This class B digital apparatus complies with
IC Radiation Exposure Statement: This equi
uncontrolled environment.
Avis d'Industrie Canada
Cet appareil est conforme à la norme CNR-2
deux conditions suivantes: 1) Cet appareil ne
les interférences, y compris celles pouvant
Cet appareil numérique de la classe B est co
Avis d'Industrie Canada sur l'exposition aux
rayonnements d'Industrie Canada pour un e
RF Exposure Warning
This equipment must be installed and opera
transmitter must be installed to provide a s
located or operating in conjunction with an
antenna installation instructions and transm