Aeritech ISO Montaj ve Kullanım Talimatları Kılavuzu - Sayfa 11

Hava Araçları Aeritech ISO için çevrimiçi göz atın veya pdf Montaj ve Kullanım Talimatları Kılavuzu indirin. Aeritech ISO 12 sayfaları. Design for fpv

Sayfayı Yazdır

3.C.G adjust

C.G position

Please make sure the CG position at this.

4. Other instruction

LiPo charging instructions



Charge the LiPo battery by connecting the wall socket adapter (not included) to the balance charger.When

power is supplied to the balance charger, connect the charge lead (usually white) of the LiPo battery to the

balance charger.



Always supervise charger while in use and avoid charging battery for extended periods of time.

Power ON instructions



Make sure throttle stick and throttle trim is set to the "OFF" position and then power on the transmitter.

Afterwards power up the aircraft by connecting the battery to the electronic speed control. To power down,

power down in reverse order thus disconnect the battery to the electronic speed control then turn off the

transmitter.