Acoustic Research AWSBT7WH Kurulum ve Kullanım Kılavuzu - Sayfa 2

Konuşmacılar Acoustic Research AWSBT7WH için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Kılavuzu indirin. Acoustic Research AWSBT7WH 6 sayfaları. Portable wireless speaker

Sayfayı Yazdır
Introduction
The Acoustic Research AWSBT7WH portable wireless speaker makes it easy to take
your music wherever you go and share it whenever you want, with Bluetooth® wireless
connectivity and an built-in auxiliary input. It's compact, easy-to-carry and simple to use, with
a UV and water-resistant exterior that lets you use it practically anywhere, indoors or out.
This manual covers various connection options and detailed operating instructions for
making the Acoustic Research Portable Wireless Speaker a valued part of your lifestyle. If,
after having reviewed the instructions, you have any questions, please call
toll-free 1-800-732-6866 or visit www.acoustic-research.com.
Tour of the Speaker

Back panel

Power and Pairing indicator
status of the speaker.
Blue, slow blinking: The speaker is on but not
paired or connected (like when you turn the
speaker on for the first time).
Blue, fast blinking: The speaker is in Bluetooth
pairing mode. See the Bluetooth Setup section
for more information.
Solid blue: The speaker is paired with a
Bluetooth-enabled device and ready to play
audio.
On-Off
button turns the speaker on and off.
Pair-Press and hold (3 sec)
speaker in pairing mode for Bluetooth setup
(press and hold for 3 seconds). It also performs
a fast reconnect with devices that have lost
connection (press). See the Bluetooth setup
section for more information.
Volume +/–
buttons adjust the speaker's
volume level.
Audio Input
connects directly to your
MP3 player, smartphone, or other portable
audio device, using the 3.5mm audio in cable
provided.

Bottom panel

DC IN
receives the small round end of the
included 10V 1500mA AC power adapter;
remove the protective cover to insert the
adapter.
Battery Compartment Cover
remove to install 6 AA batteries.
Powering th
Powering the Speake
There are two options to power you
or using 6 AA batteries (not include
AC Power Adapter
AA Batteries
shows the
1. Remove the battery compartmen
2. Insert six (6) AA batteries (not in
("+" and "-") as diagrammed ins
3. Replace the battery compartmen
Note:
Place the rubber cap in the s
DO NOT
battery).
when not in use for long periods. Alwa
recycle or dispose of them in accordan
puts the
Setting Up B
Pairing
The Bluetooth-enabled device that
fi rst be paired to the speaker. The p
needs to be done only once.
To pair your Bluetooth-enabled dev
1. Make sure your device's Bluetoo
menu on your device to check.
2. If the speaker isn't already on, p
to indicate the speaker is turned
fl ashing blue.
3. Press and hold for 3 seconds the
to indicate pairing mode is enter
faster.
4. Open the Bluetooth settings men
devices available (you might hav
enter "0000".
5. A confi rmation screen will appea
successfully paired. The blue ind
The speaker is now ready for you
6. Turn the volume on your device t
device. Control the speaker volum
the back of the speaker.
Note:
If you notice the sound from the s
•
mix batteries with different
DO NOT
mix new and used