Aerix DaVinci Kullanıcı Kılavuzu - Sayfa 9

Dronlar Aerix DaVinci için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Aerix DaVinci 16 sayfaları.

3.Preperation for Flight

Aircraft Battery On/Off Button

Short Press the Power Button, the indicator

lights will power up briefly, displaying battery level.

To power on, press and hold the power button

for 4-6 secs. The indicator lights will power up.

To power off, press and hold the power button

for 4-6 secs. The indicator lights will turn off.

Pairing Procedure

ATTENTION: Be sure to complete the INITIAL BINDING procedure correctly.

INITIAL BINDING:

Install a fully charged battery into the bottom of the aircraft. Press and hold the

Return Home button and turn on the transmitter. "Searching RF signal.." will

appear on the transmitter's display.

Next, turn on the aircraft's battery and place the aircraft on a flat surface.

After successful binding the signal strength bars will appear as shown below.

BASIC PAIRING:

Install a fully charged battery into the bottom of the aircraft.

Next, turn on the aircraft's battery and place the aircraft on a flat surface.

After successful pairing the signal strength bars will appear as shown below.

One touch return home

On/off button

Searching RF signal..

Signal strengths bars

The main interface

On/off button

Indicator

lights