3DLabPrint Focke-Wulf Ta 152 C Kullanıcı Kılavuzu - Sayfa 2

Oyuncak 3DLabPrint Focke-Wulf Ta 152 C için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. 3DLabPrint Focke-Wulf Ta 152 C 9 sayfaları. Fully 3d printable upgrade to short wing

Sayfayı Yazdır

... print your plane | www.3DLabPrint.com

Focke-Wulf Ta 152 C

–

fully printable update for Ta 125 version C - short wing

Extensive hi-tech 3d structural reinforcement

making the model very

rigid while maintaining a lightweight airframe and exact airfoil even it's just a plastic. This

perfect and exact 3d structure is possible only thanks to additive 3dprinting technology. So

welcome to the 21st century of model flying and be the first at your airfield.

Easy to assembly,

you don't need any extra tools or hardware, just glue printed

parts together and make pushrods for control surfaces. The rest of the assembly is very

easy. Simply add brushless motor, ESC, servos and radio system. Don't worry, detailed step

by step PDF/VIDEO is included.

You'll get a superb performing airplane with highly efficient powerplant capable of flying 7+

minutes at full throtle and speeds exceeding 110 kph (HP setup). Low stall speed is achieved

for easy landing on the other hand.

Note: this upgrade includes only shorter C version wing, F2 and F4 fuselage parts with ACES

wing holder and motor holder. You will need

basic 152H version

for all mandatory parts.

960 mm / 37.8 inch

version C

version H wingspan

1236 mm / 48.2 inch

page