Altman SPECTRA Series Kullanım Kılavuzu - Sayfa 11

DJ Ekipmanları Altman SPECTRA Series için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Altman SPECTRA Series 11 sayfaları. Uv led
Ayrıca Altman SPECTRA Series için: Programlama Kılavuzu (18 sayfalar), Kullanıcı Kılavuzu (15 sayfalar)

Sayfayı Yazdır

Spectra Series

MASTER MODE

Master Mode only works while in STAND-ALONE EFFECTS MODE (see page 8). It causes the unit that is

set to Master Mode to behave like a console and Transmit 4-channel (RGBA) 8-bit DMX set on address 001,

reflecting its present light output.

Note: Only the first unit that is going to serve as the MASTER fixture should be set to Stand-alone Effects

mode with Master Mode on. Stand-alone Effects Mode with Master Mode on should also not be used while

units are connected to a DMX console. All fixtures following the Master fixture should be set with the Master

Mode OFF, for Normal Operation.

To Turn on MASTER MODE:

1. Place fixture in Stand-alone Mode (see page 8)

2. Wait a few seconds until the display goes blank

3. Press and hold the [ HUNDREDS ] button

4. Press and hold the [ ONES ] button

5. Release the [ HUNDREDS ] button

6. Release the [ ONES ] button

7. Display will show

8. Address remaining fixtures connected to the MASTER fixture to DMX address 001

To Turn off the MASTER MODE:

Wait a few seconds until the display goes blank

Press and hold the [ HUNDREDS ] button

Press and hold the [ ONES ] button

Release the [ HUNDREDS ] button

Release the [ ONES ] button

Display will show

Lighting

BRINGING IMAGINATION TO LIGHT

( Different than the Master Channel described on page 7.)

for a moment to indicate new setting and then blink.

OFF

for a moment to indicate new setting and then blink.

57 Alexander St., Yonkers, NY 10701

O P E R A T I O N

Tel: 914-476-7987

Visit our website at www.altmanlighting.com

M a n u a l