3DLabPrint Printed Racers Street Kart Kullanıcı Kılavuzu - Sayfa 6

Motorlu Oyuncak Araba 3DLabPrint Printed Racers Street Kart için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. 3DLabPrint Printed Racers Street Kart 12 sayfaları. 1/15 scale vehicle

Sayfayı Yazdır
Street kart assembly
15.
Solder wires from ESC to the N20
motor. Install motor gear to the
motor shaft. Fitment should be
without any tolerance.
16.
Install rear axle bearings mounts
from below to the lower plate.
Fitment should be without any
tolerance.
STREET KART user manual
Street kart assembly
17.
Secure rear axle bearings mounts
with plastic parts on both sides
with
M1.6x5mm
screws.
18.
Secure RX in cooler with
M1.6x5mm
screws.
I
printed_racers
10