Alto ELVIS 12 MKII Kullanıcı El Kitabı - Sayfa 6

Konuşmacılar Alto ELVIS 12 MKII için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Alto ELVIS 12 MKII 14 sayfaları. Passive models
Ayrıca Alto ELVIS 12 MKII için: Servis Kılavuzu (17 sayfalar)

Sayfayı Yazdır

1. Technical Specification

HOOK

2. QUICK START - PASSIVE SPEAKER CABINETS

Passive two subwoofers and two satellite speakers. With this example, the

stereo amplifier drives both the subwoofers and the satellites. In this case we

do not call them full-range anymore because they receive a signal from the

subwoofer that is already covered at 125 Hz. In this way, the high energetic

content of the low frequencies is limited to the subwoofer and the satellite's

woofer act like a mid-woofer.

1). Connect one side of speaker cable to the Output CHA/CHB or Binding Post

of your stereo power amplifier and the other side to the Input socket of your

subwoofer, with the second speaker cable connect the Output of the sub

-woofer to the Input of satellite.

2). Complete other connections as illustrated.

3). Turn on your mixer first, then the stereo power amplifier.

4). Turn up the volume controls of your amplifier to about 70%.

5). Use PFL function to get the proper input level for the mixer, and adjust the

Main Mix Level control to manipulate the output level.

6). After use, turn off your stereo power amplifier first, then the mixer.

INPUT

OUTPUT

ELVIS MKII SUBWOOFER

STEREO AMPLIFIER

SIG CLIP PROT

CH1

(dB)

CH2

(dB)

INPUT

MIXER

INPUT

500W 2

OUTPUT

INPUT

ELVIS MKII SUBWOOFER