Alto ELVIS 15.2XL Kullanıcı El Kitabı - Sayfa 4

Konuşmacılar Alto ELVIS 15.2XL için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Alto ELVIS 15.2XL 16 sayfaları. Passive and active models
Ayrıca Alto ELVIS 15.2XL için: Kullanıcı Kılavuzu (11 sayfalar)

Sayfayı Yazdır

HOOK

2. QUICK START - PASSIVE SPEAKER CABINET

Passive, Full-range, two speakers. This is the simplest set-up. You just need

a mixer and a stereo amplifier. It is good for small club gigs, disco,etc.

Make all initial connections with all the equipment powered off, and ensure that

all the main volume controls are turned down completely.

1). Connect one side of the speaker cable to the Output CHA/CHB or Binding

Post of your stereo power amplifier and the other side to the Input socket

of your Elvis speaker cabinet.

2). Complete other connections as illustrated.

3). Turn on your mixer first, then the stereo power amplifier.

4). Turn up the volume controls of your amplifier to about 70%.

5). Use PFL function to get the proper input level for the mixer, and adjust the

Main Mix Level control to manipulate the output level.

6). After use, turn off your stereo power amplifier first, then the mixer.

STEREO AMPLIFIER

SIG CLIP PROT

CH1

(dB)

CH2

(dB)

MIXER

500W 2