Alto SPIN 43 HS Kullanım Talimatları Kılavuzu - Sayfa 5
Zemin Makinesi Alto SPIN 43 HS için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Alto SPIN 43 HS 16 sayfaları. Single-disc machine
Sayfayı Yazdır
Workplace
The workplace is behind the
cleaner.
General
Use of the cleaner is subject to
current national regulations.
Besides the operating
instructions and binding
accident prevention regulations
valid in the country of use,
observe recognized regulations
for safe and proper work.
Never use unsafe cleaning
techniques.
Do not use the cleaner on
public paths and roads.
Electrical connections
CAUTION!
Never push the cleaner over
power cords. Danger of
electrocution!
Do not damage the power cord
by riding over it, crushing or
pulling it, etc.
Check the power cord regularly
to detect signs of damage.
Do not use the cleaner if the
condition of the power cord is
poor.
When using or replacing power
cords, do not use any other
cords than those specified by
the manufacturer.
18
When replacing couplings or
power cords, ensure that splash
water protection and
mechanical strength are
adequate.
Do not start the cleaner unless
the power supply in the building
to be cleaned complies with the
specifications on the rating plate
of the cleaner.
Risks
CAUTION!
The cleaner is not suitable to
clean surfaces that release
hazardous dust and liquids. Do
not use on steps.
Inclines
This cleaner is designed for use
on level surfaces with a
maximum incline of 2% only.
Stationary cleaner
When the cleaner is stationary,
switch off the brush unit
immediately to prevent damage
to the floor covering.
Cleaning agents
Only use cleaning agents
approved by Alto.
Maintenance
Service and repair work should
be carried out by persons with
technical and legal authorization
only.
When cleaning and servicing
the cleaner, replacing parts or
changing mode of operation,
switch off the cleaner and
unplug it.