Alto SPIN 43 HS Kullanım Talimatları Kılavuzu - Sayfa 8
Zemin Makinesi Alto SPIN 43 HS için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Alto SPIN 43 HS 16 sayfaları. Single-disc machine
Sayfayı Yazdır
4 Control/Operation
4.1
Electrical connections
4.2
Using accessories
2
1
3
4
5
CAUTION!
Connect the cleaner to a proper
electrical installation only.
Follow safety instructions in
Chapter 1.
1. Plug the cleaner into a
socket.
1. Place the accessory (brush
or drive plate with pad) on
the floor.
2. Tip the cleaner on to its
wheels and push it over
accessory until the drive star
and the brush flange are
vertically aligned.
3. Lower the cleaner on to the
accessory.
4. Pull the shaft adjustment
lever (1) and lower the shaft
into its cleaning position.
NOTE!
Extend both arms loosely
downwards (2). Always guide
the cleaner with both hands on
the handle (3).
5. Align the cleaner horizontally
on the accessory.
NOTE!
When using the SPIN 43 DS,
use low speed to fit the
accessory.
6. Press the switch lock (4) and
briefly press the brush motor
switch (5). The brush motor
runs and the accessory
automatically engages.
21