Alto 30HA STANDARD/MASTER Kullanıcı El Kitabı - Sayfa 12

Basınçlı Yıkama Alto 30HA STANDARD/MASTER için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Alto 30HA STANDARD/MASTER 19 sayfaları. Alto-shaam inc. pressure washer user manual

Sayfayı Yazdır

3.4 Temperature control

Choose the desired temperature with the control knob (16).

Note: If the machine is put away immediately after hot water or steam operation, it should be cooled in

"cold water" operation until the temperature is below 120°F. This will take approximately 2 minutes.

IMPORTANT (only 30HA Master): Adjustment to temperatures above 176°F should be made with the

trigger released. When choosing temperatures above 176°F (steam operation) the water volume is auto-

matically reduced. Then full water volume for cold water or hot water operation cannot be obtained until the

temperature of the outlet water has fallen below 176°F. Once the temperature is below 176°F, release and

squeeze the trigger to return to full water volume again. The cooling period, from max. temperature (302°F)

to full water volume is approximately 1 minute.

3.5 Spray lance, pressure regulation, how to use detergents

The spray lance features a high pressure nozzle and a low pressure nozzle. When the pressure reducing

valve (1) is completely closed (clockwise - B), only the high pressure nozzle is used and you're in the "high

pressure mode". When the pressure reducing valve is open (counter clockwise - A), both nozzles are

used and you're in the "low pressure mode" (where you can also add detergents). The pressure may be

infinitely varied between "full" and "low".

Operating instructions

Cold water mode

Hot water mode

Steam mode

Turn pressure reducing valve:

Clockwise (B): for high pressure

Counter clockwise (A): for low pressure

and detergent application

34 - 104°F

104 - 176°F

302°F