Alto X23 Kullanıcı Kılavuzu - Sayfa 6

Çapraz Geçiş Alto X23 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Alto X23 12 sayfaları. 2-way stereo/3-way mono active crossover
Ayrıca Alto X23 için: Kullanıcı Kılavuzu (13 sayfalar)

Sayfayı Yazdır
3. CONTROL ELEMENTS
2-Way Stereo
T o work in this mode, configure your system and connect cables as follow:
1. Release the
2. Feed a stereo signal from the Mixer to the Input Connectors of CH1 and CH2.
3. Output the Low frequencies signal via OUT LOW 1 & 2 to the power amplifier
dedicated to the woofers.
4. Output the High frequencies signal via OUT HIGH 1 & 2 to the power amplifier
dedicated to the high frequency transducers.
5. Set LOW-HIGH Crossover Range of CH1 and CH2 to 10 (switch engaged) and
select the desired crossover frequency.
6. Power up your X23 first, then the power amplifiers. After use, please ensure
the power amplifier is turned off first, then your X23.
Rated Power Consumption 8.5W
FUSE:
210-240V: T100mAL 250VAC
95-120V: 200mA 250VAC
REPLACE FUSE WITH CORRECT
TYPE ONLY
A101
DESIGNED IN ITALY
MADE IN CHINA
4
4. APPLICATIONS
MODE
switch to enter into the 2-way stereo mode.
LTO
R
MAC 2.4
Stereo Power Amplifier
ON
CH1
CH2
POWER
PROT
CLIP
SIG
OFF
POWER
HIGH
PHASE
2WAY- STEREO
/
( 3WAY- MONO)
HIGH OUT 2 / (HIGH OUT)
LOW OUT 2 / (MID OUT)
ON
OFF
POWER
PUSH
STEREO MONO
NEW
TIDE
CD
3
BOOST
MODE
2
1
INPUT 2 / (NOT USED)
CHANNEL 2
LTO
R
MAC 2.4
Stereo Power Amplifier
CH1
CH2
POWER
PROT
CLIP
SIG
HIGH
PHASE
HIGH OUT 1 / (NOT USED)
LOW OUT1 / (LOW OUT)
CHANNEL 1
PUSH
NEW
TIDE
CD
3
BOOST
2
1
INPUT 1 / (INPUT)