Diversified Fall Protection Portable Truss Anchor Kullanıcı kurulumu - Sayfa 12

Eskrim & Kapılar Diversified Fall Protection Portable Truss Anchor için çevrimiçi göz atın veya pdf Kullanıcı kurulumu indirin. Diversified Fall Protection Portable Truss Anchor 16 sayfaları.

Sayfayı Yazdır
VII.

Specifications and Parts

A. System as an assembly is rated for a 310 pound user. Contact DFP if 420 pound capacity is required
B. Portable Truss Anchor (See Figure 20)
Main Body
•
Material : ½" Thick A36 Steel
•
Finish: Powder Coat Safety Yellow
Threaded Attachment
•
Material: Plain Steel – Rockwell Hardness B75
•
Right hand thread
•
¾" Diameter
•
Finish: Powder Coat Safety Yellow
Weld
•
Weld by AWS D1.1 Certified welder in conjunction with the requirements of OSHA
•
Electrode has a minimum tensile strength of 70 ksi
Maximum Allowable loading
•
One (1) 420 Pound User
When used independently of this system
o
•
Mass Arresting Force of 900 Lbs
C. Extension Pole (See Figure 21)
Main Body
•
Material: smooth 1-¼"round fiberglass handle
•
Color: Yellow
•
Reach: 6'-18' (1.8m-5.4m) 3-section extension pole
Telescoping Slider Tubes
•
Size: 1" (2.5 cm) and 7/8"(2.2 cm) diameter round
•
Material: aluminum
•
Finish: Clear anodized
Threaded End
•
Material: Cast Aluminum
External Locking Device x2 (See Figure 22)
•
Material: Plastic
•
Mechanism: Compression lock with course threads
•
Color: Outer sleeve is black
Handle Grip
•
Black rubber grip
Clamp and Eyebolt
•
Body: Zinc plated steel
•
Liner: UV-resistant EPDM Rubber , ASTM E-84
•
Meets Buy America Act
•
Eyebolt: 3/8"-16 Steel Zinc Plated 144 pound work load Limit
•
Screw Protector: Black pliable vinyl with a durometer of 75A
Diversified Fall Protection, LLC.
www.fallprotect.com
Internal sleeve is red
Portable Truss Anchor Instruction Manual – V 1
Copyright Diversified Fall Protection 2013 ©
Figure 21 -
Extension Pole
Figure 20 - Anchor
Dimensions
Figure 22 -
External
Locking
Device on Pole
Page 12 of 16