Alto DYNAMATE Kullanıcı Kılavuzu - Sayfa 2

Kayıt Ekipmanları Alto DYNAMATE için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Alto DYNAMATE 19 sayfaları.

Safety Instructions

All safety and operating instructions should be read before the equipment is installed and operated. We recommend that

installation be carried out by an authorised mobile electronics installation company. Please contact your local ALTO

Mobile distributor for a list of authorised installers in your country.

To reduce the risk of electric shock and potentially damaging the equipment, do not disassemble the product. No user

serviceable parts inside; refer servicing to qualified personnel.

The equipment should be protected from moisture and rain, especially if mounted in the vehicle's trunk area or any

location that may be susceptible to water ingress.

The equipment should be situated so that its location or position does not interfere with its proper ventilation. For

example, the product should not be situated under carpeting or in a totally sealed enclosure. Trunk-mounted equipment

/amp racks should be well ventilated, using forced air cooling fans if necessary. The equipment should be situated away

from heat sources such as engine exhaust systems and radiators.

This product is designed for vehicles with a 12 VOLT NEGATIVE GROUND electrical circuit. This product must not be

used in vehicles that use a 24 Volt supply or a positive ground electrical circuit.

Great care must be taken when wiring the product to the vehicle's electrical system. Unless you are fully familiar and

trained in wiring automotive electrical systems, installation should only be undertaken by a qualified automotive electrician.

LTO