Alto LYNX-MIX62 Kullanıcı Kılavuzu - Sayfa 17

Kayıt Ekipmanları Alto LYNX-MIX62 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Alto LYNX-MIX62 20 sayfaları.

Sayfayı Yazdır

9. TECHNICAL SPECIFICATIONS

Input channels
Microphone input
Frequency response
Distortion (THD & N)
Gain range
SNR (Signal to Noise Ratio)
Line input
Frequency response
Distortion (THD & N)
Sensitivity range
Impedances
Microphone input
All other inputs
Tape out
All other output
Equalization
Hi shelving
Mid bell
Low shelving
DSP Section
A/D and D/A converters
DSP resolution
Type of effects
Presets
Controls
Noise (bus noise)
Main Mix Section
Main Mix Section
Max output
AUX Returns gain range
AUX Sends max out
Power Supply
Main voltage
Power consumption
Physical
Dimension(W D H)
Net weight
Net weight
Shipping weight
electronically balanced, discrete input configuration
20 Hz to 22 kHz, +/ 1dB
<0.005% at +4 dBu, 1 kHz
0 dB to 50 dB (MIC)
115dB
electronically balanced
20 Hz to 22 kHz, +/ 1 dB
0.005% at +4 dBu, 1 kHz
+15 dBu to 35 dBu
1.4 k Ohm
10 k Ohm or greater
1 k Ohm
120 Ohm
+/ 15 dB @12 kHz
+/ 15 dB @ 2.5 kHz
+/ 15 dB @ 80 Hz
24-bit
24-bit
WARM HALL,BRIGHT HALL,WARM ROOM, BRIGHT ROOM,
VOCAL1,VOCAL2,VOCAL3,,PLATE,STEREO
DELAY 1, STEREO
DELAY2, REV+DELAY1,REV+DELAY2,REV+DELAY3,REV+
DELAY4,REV+CHORUS1,REV+CHORUS2
16
16-position PRESET Selector, CLIP LED, MUTE SWITCH
With LED Indicator
Fader 0 dB, channels muted: 94 dBr (ref.:+4 dBu)
Fader 0 dB, all input channels assigned and set to
UNITY gain: 92 dBr (ref.:+4 dBu)
+22 dBu unbalanced, 1/4" jacks
-
to +10 dB
+22 dBu
18V~1000mA
18 Watts
202*250*58mm
2.3Kg (5.07lb)
1.4 Kg (3.09 lb)
12Kg(4pcs) (26.46lb)
15