Acoustic Research AW822 Kurulum ve Kullanım Kılavuzu - Sayfa 6

Hoparlör Sistemi Acoustic Research AW822 için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Kılavuzu indirin. Acoustic Research AW822 13 sayfaları. Wireless indoor/outdoor speaker with auto-tuning

Sayfayı Yazdır

Connecting the Speaker System

Powering the Transmitter
Connect the small, round plug from the transmitter AC power adapter to the
transmitter's power input jack. Plug the other end of the transmitter AC power
adapter into any standard 120V AC wall outlet.
Transmitter
Connecting to an Audio Source
Connecting to an A/V Receiver
Transmitter
Audio Input Cable
Connecting to a TV
Transmitter
Audio Input Cable
Connecting to a Stereo or Computer
Transmitter
Audio Input Cable
120V AC
wall outlet
AC Power
Adapter
A/V Receiver
Audio Output
"Y" adapter cable
TV
Audio Output
"Y" adapter cable
Stereo
1/4" headphone
adapter
Note: Be sure to use the AC power adapter rated
12V DC 100 mA.
Note: There is no transmitter ON/OFF switch.
The transmitter is designed to be left plugged in
and powered at all times. If you will not be using
the AW822 for an extended period of time, unplug
the transmitter AC power adapter.
1. Connect the included "Y" adapter cable to
the 3.5mm mini-plug cable coming out of
the transmitter.
2. Connect the left (white) and right (red)
audio plugs on the "Y" adapter cable to the
corresponding left and right audio outputs of
your A/V receiver, amp or other audio source.
1. Connect the included "Y" adapter cable to
the 3.5mm mini-plug cable coming out of
the transmitter.
2. Connect the left (white) and right (red)
audio plugs on the "Y" adapter cable to the
corresponding left and right audio outputs
on the TV.
Plug the cable coming out of the transmitter
into the headphone output of your stereo or the
audio output jack on your computer. Use the
included 1/4" headphone adapter to convert the
3.5mm plug to a 1/4" plug as needed.