Balmar SG200 Kurulum ve Kullanım Kılavuzu - Sayfa 14
Monitör Balmar SG200 için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Kılavuzu indirin. Balmar SG200 19 sayfaları. Battery monitor
Sayfayı Yazdır
Advanced Settings
Advanced Settings
The advanced menu for any SmartShunt allows the user to perform several
levels of reset of SmartLInk devices on the network. An explanation of each of
options is in the table below:
Menu Option
Description
RESTART DEV
RESTART DEVICE - Reboots the device (a Display
or SmartShunt) that is currently selected (shown
at the top of the screen).
RESET
RESET NETWORK - Resets the SmartLink
NETWORK
network. Learning, chemistry, faults etc. are all
retained.
FACTORY RST
FACTORY RESET - Performs a FULL reset of the
device. ALL history, including faults, chemistry,
capacity, learning etc. is reset. Performing a
Factory Reset on device does not perform a reset
on any other devices or SmartShunts on the
network. A Factory Reset should be performed
every time a battery bank is replaced.
XECHO (not
This performs a loopback test from the Display to
shown in
the device that is currently selected. It is useful
screenshot
for testing the network connectivity between the
above)
two devices. If you are getting errors, it typically
indicates a bad cable connection. (Note: While
you can run a test to the Bluetooth Gateway, it is
not a functional test and will give a false result.)
26
Performing a long press on any of the advanced settings immediately
performs that function, except for FACTORY RESET, which has a
confirmation step to help avoid false resets.
Specifications
Standard Configuration
Supply Voltage Range
MAX Bank Current-Monitored
Battery Size
Average Supply Current
SmartShunt Operating
Temperature:
SmartShunt Max Current @
24°C (75°F)
Display Values
Communications Cable
Grounding
Standards Compliance
1 Bank per SmartShunt Device
2 Start/Auxiliary Voltage Sense Lines
(Up to 32 Devices including Displays
and SmartShunts can be added to single
network.)
8-60V
1Ah-1310Ah
Display On: 20mA @ 12V
Sleep Mode: 10mA @ 12V
-40°C - +85°C (-40°F- +185°F)
350A Continuous
600A for 10 minutes
State of Charge (SoC%)
State of Health (SoH%)
Voltage (V)
Charge/Discharge Current (A)
Time Remaining (Hrs, Minutes)
History, Faults and Alerts
4-wire, 22AWG, Shielded
4-pin Deutsch DT Style
Negative Battery Connection
CE EMC Directive 2014/30/EU
RoHS 2 Directive 2011/65/EU
27