Clear2there C2TDVR1016 Kullanıcı Kılavuzu - Sayfa 8

DVR Clear2there C2TDVR1016 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Clear2there C2TDVR1016 18 sayfaları. 4 channel 1000 series

Sayfayı Yazdır
Click the DATE / TIME menu and click the ON/OFF menu.
DATE TIME: Allows the operator to set or modify the
current date & time.
DATE FORMAT: Determines how the date is displayed.
TIME FORMAT: Determines how the time is displayed.
NETWORK TIME SERVER SETUP: If the DVR is
connected to the Internet, the time and date can be
accurately set by selecting SYNC and pressing ENTER.
TIME ZONE SETUP: should be set according to the region
that the DVR is used in.
D.S.T.: When set to ON, the DVR will automatically adjust
the time by one hour on the relevant date in
spring and autumn.
8.4.2. NETWORK
System Setup
SYSTEM

USER MANAGEMENT

SYSTEM MANAGEMENT
CONTROL DEVICE
Click the NETWORK menu and click the ON/OFF menu.
DHCP: When enabled, the DVR will obtain an IP address
automatically if connected to a DHCP server or router.
DDNS: When enabled, the DVR can be accessed through
a Dynamic DNS server.
Commonly used if a broadband connection does not have
a static IP address.
IP ADDRESS: If DHCP is not being used, the IP address
can be manually set.
GATEWAY: If DHCP is not being used, the gateway IP
address can be manually set.
SUBNET MASK: If DHCP is not being used, the subnet
mask can be manually set.
1ST DNS SERVER: If DHCP is not being used, the first
DNS server can be manually set.
2ND DNS SERVER: If DHCP is not being used, the second
DNS server can be manually set.
DDNS SERVER: If DDNS is enabled, the host DDNS
server is specified here.
You can set DDNS SETUP, when the DDNS SERVER
(dvrlink.net) is selected,
<DDNS SETUP>
<User ID> and <Password> should be the same to the
router user information.
User can check DDNS STATUS, when the <DDNS
STATUS> button is pressed.
Default <DDNS HOST NAME> is Mac Address so user can
DHCP
DATE/TIME
NETWORK
DDNS
WEB SERVICE
MAIL
IP ADDRESS
GATEWAY
SUBNET MASK
ST
1
DNS SERVER
ND
2
DNS SERVER
DDNS SERVER
RTSP SERVER PORT

WEB SERVER PORT

MAX TX SPEED
connect by two different ways. (Mac address / Own host
name)
a. 00115ff00213.dvrlink.net
b. 1234.dvrlink.net,
User can enter any DDNS Host name using Virtual
Keyboard.
RTSP SERVER PORT: The port number that the DVR
uses to support remote connection from the client
software.
WEB SERVER PORT: The port number that the DVR uses
to support remote connection from Internet
Explorer or other web browsers.
ALIAS: Display full domain name for accessing DVR.
This will be activated when press AUTO button beside of
WEB SERVER PORT.
MAX TX SPEED: Specifies the maximum bandwidth that
the DVR can use during a remote connection
8.4.3. MAIL
System Setup
SYSTEM
USER MANAGEMENT
SYSTEM MANAGEMENT
CONTROL DEVICE
Click the MAIL menu and click the ON/OFF menu.
DEFAUT SERVER: Use default mail server for sending
email notification.
SERVER: The SMTP outbound email server that should be
used to send email notifications.
PORT: The outbound email port number.
SECURITY: Set to OFF if the SERVER does not require a
username and password to connect.
USER: Enter a username to identify the DVR in email
messages.
PASSWORD: If SECURITY is set to ON, enter the
password here.
TEST E-MAIL: Send a test email to registered users.
8.4.4 USER MANAGEMENT
System Setup
SYSTEM
USER MANAGEMENT
SYSTEM MANAGEMENT
CONTROL DEVICE
Click the USER MANAGEMENT menu and double click
the ADMIN on the GROUP menu.
By default, the DVR is configured with a user ID of ADMIN,
belonging to the ADMIN group and with a password of
1234.
As well as the ability to add new users, existing user details
can be modified.
To modify user details, highlight the user with the green
cursor then double click.
DEAFULT SERVER
DATE/TIME
NETWORK
SERVER
MAIL
PORT
SECURITY
USER
PASSWORD
TEST E-MAIL
USER ID
DATE/TIME
NETWORK
GROUP ID
MAIL
E-MAIL
PASSWORD EXPIRY