Cameron CVC-1080 Kullanım Kılavuzu - Sayfa 16
Elektrikli Süpürge Cameron CVC-1080 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Cameron CVC-1080 19 sayfaları.
Sayfayı Yazdır
5. Re-insert the dust container into the
product and close the lid to re-fit.
[G]
CLEANING THE DUST COMPARTMENT FILTER
It is essential that filters are cleaned regu-
larly to maintain performance.
1. Remove the dust container from the
product as detailed in the previous
section.
2.
Lift the filter (7) out of the container [H].
3.
Remove the top foam filter as shown [I].
Gently shake the foam clean. The
pleated filter can be gently knocked against the
side of the dustbin to remove excess dust.
To refit the filter reassemble and locate into the hole in
the top of the dust container.
•
The filter should be regularly washed In cold water
and left to air dry before Inserting back into the
machine.
IMPORTANT:
Do not use detergents to clean the filter. The filter must be thor-
oughly dry before the machine is used.
A spare filter is provided.
IMPORTANT:
The dust container will not lock back onto the machine unless the
filter is fitted correctly.
An additional pre-motor filter is located
underneath the dust compartment lid. Lift
up the lid, the filter is located to the rear
[J].
This should only require occasional clean-
ing. Remove and shake rigorously to
clean.
PRE-MOTOR FILTER
16