Balteco Pao Kullanıcı El Kitabı - Sayfa 2

Sıhhi Tesisat Ürünleri Balteco Pao için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Balteco Pao 8 sayfaları. Xonyx solid surface

Sayfayı Yazdır
CAUTION: Never allow children to use the bath/shower cabin without adult supervision to avoid
•
accidents.
CAUTION: Physically challenged people must exercise extreme caution and/or use assistance if
•
necessary when using bath/shower cabin.
CAUTION: Do not use external electrical devices while taking a bath or shower. Devices located
•
at the bath's vicinity, being connected into electricity network, must be fastened in such a way
as to avoid their accidental falling.
CAUTION: Upon failure/damage or abnormal functioning of any appliances of the bath/shower
•
cabin a technical maintenance professional must be called. Use of damaged product or product
with failure of any type is strictly forbidden.
Before using the bath, check the water temperature in the bath. Suitable is water temperatures
•
up to 40ºC. Pouring over 60ºC water into the bath/shower cabin may damage the material.
Do not use the bath/shower cabin when being intoxicated with alcohol or drugs.
•
Take care when entering or leaving the bath/shower cabin to avoid injuries.
•
Consult your physician before using the bath when you're pregnant or suspect pregnancy.
•
Consult your physician before using the bath when being sick.
•
All the openings of the bath/shower cabin must be clean and unobstructed.
•
IMPORTANT: Installation (plumbing, construction and/or electrical) must be performed by
authorized professionals and according to all local laws and regulations Improper and
unauthorized installation could be dangerous to the users and the products should not be used
in such case. The manufacturer assumes no liabilities of any kind in case of damage that results
from improper installation, use of the product and violation of transport and warehousing
conditions.
2.1.

TRANSPORTATION AND WAREHOUSING

Product warehousing and transport must be carried out according to the marking on the
•
packing. Storage conditions: 0°C...+40°C; relative humidity (RH) max 95%.
When receiving a packed product transported in winter conditions (transportation temperature
•
below
0°C/32°F)
+15...+30°C/+59...+86°F, max RH 95 %) for 24 hours to be warmed up before installation and
operation. Installing the unit and starting it up without prior slow warming period may result in
serious damage.
2.2.

INSTALLATION REQUIREMENTS

The room should be with ambient temperatures +15ºC...+40ºC (+59°F...+86°F) and RH max 85%.
•
Installation site must meet the requirements set forth according to all applicable local laws and
•
regulations concerning the bathroom installation products including plumbing and electrical
installation requirements.
The unit must be installed on an even dry solid floor surface and leveled.
•
Floor must have central floor drainage for drainage connection and emergency draining in order
•
to avoid flooding (in case of plumbing failure).
1.

IMPORTANT SAFETY

2.
INSTALLATION
the
product
must
be
stored
at
room
temperature
(conditions