DIVIMATH HDZero Goggle Kullanıcı Kılavuzu - Sayfa 14

Aksesuarlar DIVIMATH HDZero Goggle için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. DIVIMATH HDZero Goggle 17 sayfaları.

Normal Goggle Firmware Update Process

1. Disconnect all cables from the goggle. Keep the power cable only;

2. Copy HDZGOGGLE_xx.yy.zzz.bin to root directory of a SD card that is formatted as FAT32, and

make sure there is no previous firmware in the root directory;

3. Power on the goggle;

4. Go to Main menu | About | Flash Goggle, the display will show the status;

5. Wait for the completion (about 3 minutes);

6. Power the goggle off and then on again

Goggle Emergency Firmware Update Process

You need to download PhoenixCard.zip from the

Windows machine, for example, C:\PhoenixCard. This is a one-time process. There is no Mac or Linux

version for now.

You need to download GoggleEmergency_Revddmmyyyy.zip zip from the

extract to your local drive, i.e. C:\Tmp.

1. Launch C:\PhoenixCard\PhoenixCard.exe;

2. Follow the steps on FIG.5 to make a bootable SD card;

3. Eject the SD card from Windows, and insert the SD card into the SD card slot of the goggle;

Unplug all of the cables, i.e., HDMI in/out, Line in/out, AV in. Keep the power cable only. Power

on the goggle, you will hear a long beep immediately. Wait for 3 minutes and you will hear

another long beep;

5. Power off the goggle, and pull out the SD card from the goggle. (Do not power on goggle now);

6. Follow the FIG.6 to restore the SD Card from BOOT mode, and format it as FAT32 on Windows;