Camfil FB Series Kurulum, Kullanım ve Bakım Kılavuzu - Sayfa 9
Su Filtrasyon Sistemleri Camfil FB Series için çevrimiçi göz atın veya pdf Kurulum, Kullanım ve Bakım Kılavuzu indirin. Camfil FB Series 20 sayfaları. Fluid seal bag-in/bag-out
Sayfayı Yazdır
9. Install the plastic change-out bag(s) over the bagging ring(s). Check the door label to insure the correct
change-out bag size is installed (see Spare Parts and Accessories page 18), each change-out bag has a
tag with the bag size located on the shock cord, hemmed into the bag opening. The shock cord is to be
located between the second raised rib of the bagging ring and the housing. The seam of the bag should
be located at the top of the ring so the bag gloves are in the correct position. Once the change-out bag
has been installed on the bagging ring, install the security strap around the change-out bag with the
Velcro side out. The security strap is to be located between the first and second raised ribs of the
bagging ring. Tighten the security strap and secure any excess strap so that it does not interfere with the
door seal when the door is installed. After the change-out bag has been secured with the security strap,
extend the bag out completely. Fold and roll the bag towards the housing, squeezing trapped air out of
the folded/rolled portion of the bag until the bag is tucked neatly between the bagging ring and the filter
access port. While holding the change-out bag in this position, replace the housing access door
carefully. Tighten the doorknobs alternately by turning clockwise until door is sealed against the housing.
The filtration system is now ready for operation.
Locking handle should
close fairly easily, until
approximately 1" before
the locking handle
latch. Then moderate
pressure should be ap-
plied to lock handle.
Warning: Do not force
the locking handle to
close. See page 17 if
locking handle needs
adjustment.
Lock the locking tray
handle with the handle
latch.
9