Alto-Shaam 1000-MH2-1 Kurulum, Çalıştırma ve Bakım - Sayfa 5
Yiyecek Isıtıcı Alto-Shaam 1000-MH2-1 için çevrimiçi göz atın veya pdf Kurulum, Çalıştırma ve Bakım indirin. Alto-Shaam 1000-MH2-1 16 sayfaları.
d A N g E R
IMPROPER INSTALLATION,
ALTERATION, ADJUSTMENT,
SERVICE, OR MAINTENANCE COULD
RESULT IN SEVERE INJURY, DEATH,
OR CAUSE PROPERTY DAMAGE.
READ THE INSTALLATION,
OPERATING AND MAINTENANCE
INSTRUCTIONS THOROUGHLY
BEFORE INSTALLING OR SERVICING
THIS EQUIPMENT.
Position the heated cart to allow sufficient air
ventilation.
Cart must not be installed in any area where it
may be affected by steam, grease, dripping water,
extreme temperatures, or any other severely adverse
conditions.
INSTALLATION
Prior to moving the heated cart to the installation
site, check the dimensions of doors, passageways, and
ceiling heights in the areas through which the cabinet
must be moved. Also check the turning radius if the
cabinet must be moved around an existing structure.
The use of a fork lift or pallet lift truck is required for
moving and leveling most refrigerated cart models.
NOTe: In certain instances, it may be necessary
to remove doors and door hardware to
negotiate tight spaces.
This unit must be placed on a level floor to ensure the
automatic door closing.
I N S T A L L A T I O N
M R 2 - 1 • M N - 3 6 2 4 6 ( R E V . 0 ) • I N S T A L L A T I O N / O P E R A T I O N / S E R V I C E M A N U A L • 3 .
c A U T I o N
TO PREVENT PERSONAL INJURY,
USE CAUTION WHEN MOVING OR
LEVELING THIS APPLIANCE.
cL EAR ANcE REQ UIREMENTS
Full perimeter bumper accommodates all
clearance requirements.
Unit should not be tipped on its side.
If tipped, unit must stand in the
upright position for a mInImUm of 12
hours before operating. tipping will
cause damage to the unit and void the
warranty if not allowed to "rest"
If unit must be tipped, use extreme care.
Block casters to prevent unit from rolling
while lowering or lifting.
S I T e I N S T A L L A T I O N
.