3DTV STEREODRIVER 2001 Hızlı Başlangıç Kılavuzu

3D Gözlükler 3DTV STEREODRIVER 2001 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. 3DTV STEREODRIVER 2001 4 sayfaları.

3DTV CORP STEREODRIVER MODEL 2001

The Model 2001 is meant to be used with wired LCD shutter glasses and 50hz (PAL,

SECAM) or 60hz (NTSC) 3D field sequential (i.e., right/left alternating) video and

tube type (CRT) TV's. For higher frequency TV or PC see our other products.

Connect a standard RCA audio or video cord from the composite VIDEO OUT (a

yellow RCA jack) of your VCR, VCD or DVD player, STB (set top box--i.e., cable or

satellite) or TV to either RCA jack on the Model 2001.

Most DVD players, including BluRay players, will play any of the 50 titles of

standard definition 3D DVD's available in 3D on a CRT tv or (with vga to tv

converter boxes available on the net) on a pc CRT monitor or on certain DLP

projectors or TV's (see the faq on our page

www.3dtv.jp

for info). Some DVD

players may combine the two images and there may be no way to uncombine them

to get 3D. You will have to get a different DVD player.

Plug the stereo jack of the wired LCD shutter glasses into either of the mini jacks on

the 2001. Up to 6 wired glasses can be plugged in using standard stereo headphone

splitter plugs.

Plug in the DC adapter (not provided) and the green LED will light. To turn off the

unit unplug the DC adapter. Neither the driver not the glasses will be harmed if left

on and they use a very little electricity but it is best to unplug the power supply

when finished viewing 3D. If you wish to sit further from the TV, you may use a

standard stereo headphone extension cord between the StereoDriver and the

glasses or an RCA extension cord to the video source.

POLARITY

There is no standard for right/left eye polarity of standard field sequential 3D

DVD's. If your 3D image looks strange turn the glasses upside down and if it now

looks ok then use the enclosed stereo reversal cable (the 4 inch --6cm-- long stereo

cable) between your glasses and the Model 2001 StereoDriver to reverse the

images.

For European User's