esera EOS 100 Kullanıcı Kılavuzu - Sayfa 2
Aksesuarlar esera EOS 100 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. esera EOS 100 9 sayfaları. 1-wire outdoor - multisensor pro professional environmental monitoring via outdoor - multisensor
Ayrıca esera EOS 100 için: Hızlı Kılavuz (4 sayfalar)
Sayfayı Yazdır
1
Product description
With the ESERA EOS 100 you have purchased a professional
and highly accurate Multisensor. Due to the new technology of
the ESERA 1-Wire Outdoor - Multisensors PRO sensors, the
accuracy of the humidity readings is on average 200 - 300%
higher, compared to the most 1-Wire sensors on the market.
The EOS 100 is a professional outdoor Multisensor of the latest
generation for Building-, System- and Infrastructure monitoring.
The Environmental Multisensor measures temperature and
relative humidity with high accuracy and wide measuring ranges.
The EOS 100 has internal power and status LED indicators.
The sensor can be found quickly in large networks using the
sensor finder LED function.
Per ESERA Plug and Play System, called Auto-E-Connect, the
EOS 100 is installed fully automatically in ECO Controller via
Industrial 1-Wire Bus.
The ESERA Auto-E-Connect system, which is an extension of
the 1-Wire bus standard, has been registered as a German and
European patent by ESERA GmbH.
The integrated EMC concept with local functional grounding (FE)
makes the EOS 100 ideal for industrial environments.
Elegant IP65 surface mount housing with external measuring sensor with generous ventilation openings. The
generous ventilation openings allow for direct and fast sensing of environmental conditions.
By using high quality internal sensors with 12Bit resolution, the EOS 100 provides very accurate values for
temperature and relative humidity. In addition, the evaluation of the delivered measured values is enormously
simplified via the optimized Industrial 1-Wire protocol.
The EOS 100 is intended for outdoor use and in damp rooms, in industrial and commercial facilities, as well as for
Smart Building applications.
The electrical connection to the 1-Wire Bus system of the EOS 100 is done with push-in terminals and is done in
the standard mode (3 cables for ground, data and 5V plus functional earth (FE)).
Each EOS 100 has an individual serial number.
Note
Basics and tips for the 1-Wire bus system can be found in the ESERA Online Shop at
https://www.esera.de/1-wire-grundlagen/
or please refer to our eBook in the store under Training/Documentation.
2
Customization and optional equipment
Fast and cost-effective customer adaptations possible thanks to ESERA 80/20 concept.
80% existing technology, 20% adaptations to customer requirements.
Customization of sensor equipment already possible for small order quantities from 100 units and low
one-off costs.
Expandable with additional sensor elements, such as CO2, VOC (air quality), air pressure, ozone (O3),
nitrogen dioxide (NO2), etc.
Lacquered electronics (conformal coating) for high operational reliability under permanently high or strongly
fluctuating air humidity conditions
All rights reserved. Reproduction as well as electronic duplication of this user guide, complete or in part, requires the written consent of
ESERA GmbH. Errors and technical modification subject to change. ESERA GmbH 2021
www.esera.de
11169 V1.0 R1.1 Manual
EOS 100 interior view
Page 2 of 9