Camille Bauer KINAX N702-SSI Kullanım Talimatları Kılavuzu - Sayfa 12

Verici Camille Bauer KINAX N702-SSI için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Camille Bauer KINAX N702-SSI 14 sayfaları. Inclination transmitter with oil-damped pendulum system

Sayfayı Yazdır

6. Mounting

All inclination transmitter can be mounted either directly

with 3 clamping brackets to the item being measured or with

a mounting plate with 4 cheese head screws M6. Please take

care that the installation position of the inclination transmitter

is perpendicular to the gravity of the earth. The inclination

transmitter are supplied standard with mounting plate but

without cheese head screws M6.

Mounting versions

7. Electric connections

To connect the electrical lines, the inclination transmitter has

a sensor connector M12x1 / 8 poles.

Readout of positional values

clock

data

Bit n

Bit n-1

Impulse times:

T = 1 to 10 µs / t1 = 0,5 to 5 µs

I2 = < 0,2 µs / t3 = > 12 to 25 µs

n clock

Bit 3

Bit 2

Bit 1

• Avoid impacts or shocks on the housing.

• Do not deform housing.

• Do not open or mechanically modify the

device.

Drilling aund cut-out diagrams (for mounting transmitters)

Ø66.2

[2.606]

60.1

[2.366]

PIN conﬁ guration

Pin assignments:

1 = 0 V

2 = +24 Vs

3 = Clock +

4 = Clock –

5 = Data +

6 = Data –

7 = not used

8 = not used

• Do not electricly modify the device nor

carry out any wiring work when energised.

• Do not plug in or unplug electric connection

when energised.