3DUpFitters CR-10S Pro/CRX R1 Enclosure Kit Kullanım Kılavuzu - Sayfa 12

3D Yazıcılar 3DUpFitters CR-10S Pro/CRX R1 Enclosure Kit için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. 3DUpFitters CR-10S Pro/CRX R1 Enclosure Kit 20 sayfaları.

Sayfayı Yazdır

Before attaching the 80mm fan, plug it in

and verify that the direction is oriented to

pull air through the vent out of the

enclosure. Then use the 40mm Cap Head

screws to attach the fan to the vent port.

Observe the screw orientations in the

picture to the right.

Attach the small remaining fan port,

and the back should now look like

the image to the right.