Camille Bauer SIRAX CT330 Kullanım Kılavuzu - Sayfa 8
Transformatör Camille Bauer SIRAX CT330 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Camille Bauer SIRAX CT330 11 sayfaları. Split-core current transformer
Sayfayı Yazdır1.9 Return
All devices delivered to Camille Bauer Metrawatt AG shall be free of any hazardous contaminants (acids, lyes, solutions, etc.).
Use original packaging or suitable transport packaging to return the device.
Damage by returning
Damages caused by improper returning, no warranties or guarantees can be given.
2. Introduction
2.1 Purpose of this document
This document describes the split-core current transformer SIRAX CT300 / CT310 / CT320 and CT330. It is intended to be used by Installation
personnel, commissioning engineers, Service and maintenance personnel.
Scope
This handbook is valid for all versions of the split-core current transformer of the SIRAX line. Some of the functions described in this document
are available only, if the necessary optional components are included in the device.
Required knowledge
A general knowledge in the fi eld of electrical engineering is required. For assembly and installation of the device knowledge of applicable national
safety regulations and installation standard is required.
2.2 Scope of supply
Split-core current transformer SIRAX CTxxx with Connection set
•
Operating manual (german and english)
•
Test report
•
2.3 Further documents
The following documents are provided electronically via www.camillebauer.com:
Datasheet SIRAX split-core current transformer
•
Operating manual (german and english)
•
Flyer current transformer program
•
3. Functional description
Thanks to their compact design, simple installation and splitable core halves, split core current transformers are ideal for use in hard-to-reach and
limited space applications. Anywhere where an interruption of the current path is problematic or a measuring instrument has to be retrofitted, split
core current transformers are the right choice. They convert primary rated currents into secondary, rated currents of 5 A or 1 A, which can be used
by measuring systems. The safe installation of the primary cable or busbar to the current transformer is assured by design and is confirmed by a
clearly audible "click sound". An additional locking mechanism prevents accidental opening of the splitable core halves.
4. Assembly and installation
Ensure a safe working environment during assembly, installation and maintenance work. Disconnect the power supply of the
primary conductor and secure it against unintentional reconnection.
• The installation of the devices is arbitrary.
• To open the split-core current transformer, fi rst remove the securing pin. Then press the push
button. The divisible core halves open with an audible click sound.
• Place the split-core current transformer around the primary conductor and close the split-core
halves by fi rmly pressing them together. An audible click sound confi rms correct mounting.
Please pay attention to the cleanliness of the cut surfaces of the split-core. Avoid hand
contact (welding).
• Secure the split-core halves with the securing pin.
• The mounting of the bushing-type current transformers can either be carried out directly on
the primary conductor by means of fastening screws or on a mounting plate by means of a
fastening bracket. Use the mounting aid supplied.
• Connect now the secondary connections according to the connection diagram. Observe the
marking of the secondary terminals.
PM 1001643 000 00
Split-core current transformer SIRAX CT line
8/10