esera automation ECO 208 PRO Kullanıcı Kılavuzu

Kontrolör esera automation ECO 208 PRO için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. esera automation ECO 208 PRO 18 sayfaları. Professional 1-wire controller

Sayfayı Yazdır

esera automation ECO 208 PRO Kullanıcı Kılavuzu

Art.No.11603-48

 The ECO 208 PRO controller is a high-

performance 1-Wire interface of the 3rd generation

for sensors and actuators in the industrial and

telecommunication sector.

 fully automatic integration of sensors* and

actuators*

 WLAN and LAN Modbus TCP data interface

 max. 20 Modbus data connections

 OLED display

 8x digital inputs

 1 x relay output / alarm output

 Plug and Play interface for up to 30 sensors (e.g.

temperature, humidity, air quality, gas sensors)

 Web server for configuration, Debug and Firmware

updates

 robust industrial design

 extensive software support

 power supply -48VDC

 Auto-E-Connect Support Level I to III

 Fast readout of all 1-Wire Devices in a

1-2 seconds cycle

 Basic unit for many industrial and telecommunication solutions

 Designed for small to large 1-Wire Networks

 Management of all ESERA and many standard

1-Wire Modules and Chips

Note

Before starting the installation of the ECO 208 PRO and putting the unit into operation, read this

operating manual carefully to the end, especially the section on safety instructions.

All settings and configurations of the ECO 208 PRO are carried out with the software Config Tool 3.

You can find this software on the ESERA website. Please refer to the operating instructions for

Config Tool 3, which can be found within the Config Tool 3 software under the

"HELP/SUPPORT" tab.

* if the sensor or actuator supports Auto-E-Connect. For details, please refer to the operating instructions of the sensor or actuator.

ESERA GmbH. Errors and technical modification subject to change. ESERA GmbH 2021

www.esera.de

User Guide

ECO 208 PRO

Professional 1-Wire Controller

11603-48 V1.0 R1.1 Manual

Page 1 of 18