3DUpFitters Prusa i3 MK2 Kurulum Kılavuzu - Sayfa 13

3D Yazıcılar 3DUpFitters Prusa i3 MK2 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. 3DUpFitters Prusa i3 MK2 18 sayfaları. Enclosure kit
Ayrıca 3DUpFitters Prusa i3 MK2 için: Kurulum Kılavuzu (11 sayfalar)

Sayfayı Yazdır

7. Plugging Things In

There are a couple of things to plug in: the

Prusa itself and the fan. The old style silver

Power Supply Unit just plugs in through the

vent.

If, instead, you are using the newer black

power supply then the power cable goes

through the grommet in back.

We recommend getting a combination USB

power supply strip, available just about

anywhere. That way you can power both the

printer and accessories from the same strip,

AND turn everything oﬀ and on from outside the

enclosure.

8. Spool Holder

Instructions for assembling the spool holder are

available online. You can simply sit the spool

holder on the top of the enclosure where the

ﬁlament can ﬁt into the slit. Of course, you are free

to use whatever type of freestanding spool holder

you wish; there are hundreds of designs available

on Thingiverse.