ClearCube C7420 Hızlı Başlangıç Kılavuzu
Genişletici ClearCube C7420 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. ClearCube C7420 2 sayfaları. Special-case limitations on multi-video expander (mvx)
Ayrıca ClearCube C7420 için: Teknik Doküman (2 sayfalar)
Sayfayı YazdırC7420 Digital Fiber C/Port
Power Indicator LED
Link Indicator
DVI–I
DVI–I
Port 1
Port 2
Power
Fiber
LC Fiber
Connector
Activity
C7420
Digital Fiber C/Port
F6150–160
Fiber Transceiver
Sentral Switch
Sentral
ClearCube Technology
Quick Start Guide
USB 1.1 Ports
Power Button
Audio In
Audio Out
Reset
USB 1.1
Button
Ports
Peripherals
Fiber Connection
Network Switch
Chassis and Blades
8834 Capital of Texas Hwy N
ClearCube® C7420 Digital Fiber C/Ports provide the following:
•
LC fiber optic connector
•
Support for one or two independently–configurable monitors
•
PC–over–IP™ (PCoIP™) processors, delivering PC video and
audio over your IP network
•
Four USB 1.1 ports
•
Audio in and audio out
C7420 Digital Fiber C/Port Overview
In typical ClearCube environments, PC blades are centrally–
located in data centers. Each blade user has a user port (such as a
C7420) on their desk, which has a network connection to a PC
blade. A C7420 provides the interface to the blade. That is, the user
can connect monitors, pointing devices, and other peripherals to
the C7420 to receive peripheral data sent from a blade and to send
USB data to the blade.
The C7420 securely extends user desktops from centralized PC
blades. This point-to-point fiber optic solution supports existing
fiber cabling infrastructures that employ a pair of multi-mode
fibers for each user. The C7420 connects to a F6150 fiber
transceiver chassis using a pair of 62.5µ or 50µ, multi-mode fibers
through an LC connector.
Setting up Your C7420 Digital Fiber C/Port
Perform the following steps to set up the C7420 Digital Fiber
C/Port. To mount the C7420 under a desk, use a 9/64–inch drill bit
to drill pilot holes for the mounting bracket screws.
1. Place your C7420 on a desk or use the included mounting bracket to
mount the C7420.
–
Ensure that there is a minimum of 1.5 inches of clearance
on each side of the C/Port, and a minimum ¾–inch
clearance above the C/Port.
–
To prevent overheating, do not stand the C/Port on either
of its sides, and do not cover any ventilation holes.
–
When using the C7420 mounting bracket to mount the
C/Port under a desk, use the holes on the top of the bracket
as a hole pattern to drill holes. Ensure that the bracket is
inset 1.5 inches from the front of the desk.
2. Connect the following to the C7420:
–
USB keyboard and pointing device using the USB ports on
the front or the rear of the C7420.
–
LC fiber optic cable to the LC jack on the rear of the C7420.
–
Monitor cable to each DVI-I port on the rear of the C7420.
–
Power adapter supplied with the C7420
Austin, Texas 78759
voice 512 652 3500 www.clearcube.com