3DUpFitters Taz6 Enclosure Kit Kurulum Kılavuzu - Sayfa 6

3D Yazıcılar 3DUpFitters Taz6 Enclosure Kit için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. 3DUpFitters Taz6 Enclosure Kit 15 sayfaları.

Everything You Wanted to Know About Screwing But

Were Afraid to Ask

Screw

Tool Needed

30-50mm

Hex Cap

3mm Hex Wrench

Head

12mm Hex

3mm Hex Wrench

Cap Head

16mm Hex

3mm Hex Wrench

Cap Head

#6 3/4" Wood

Philips Head

Screw

Screwdriver

The most confusing thing about assembling this enclosure will be which fastener or screw to

use. Luckily it's pretty easy to ﬁgure out once you know the system. While the same screw to

use will be detailed in each manual section, you probably won't need to refer to it once you

know the secrets.

The most common screw is the 12mm hex cap head screw. The 12mm screws are long

enough to attach things to the acrylic front, top, sides, and back.

Each section will describe exactly which screw to use, read carefully, and use the speciﬁed

screw for the best results.

The actual length of the "long" screws to attach the fan and or ﬁlter will vary depending on the

depth of the particular shipment of fans we happen to get that month. They won't be hard to

spot since they'll be the longest thing in the bags. Assemble Panels

The front panels are thicker 1/4" acrylic to provide more structural rigidity for the doors. Do not

try to bend the 1/4" acrylic!

Usage

Attach fan/ﬁlter, attach large

front latch mounts

Connectors, hinges

Knobs, small latch mounts on

some models

Attach magnetic latch to mount

Relative Size