Akitio MyCloud Duo Hızlı Başlangıç Kılavuzu - Sayfa 2
Ağ Depolama Sunucusu Akitio MyCloud Duo için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Akitio MyCloud Duo 3 sayfaları.
Ayrıca Akitio MyCloud Duo için: Manuel (4 sayfalar)
Sayfayı Yazdır
Last update: 2015/03/25 14:02
Big LED
Small LED
Flashing orange HDD access
Rear View
Power button
DC 12V
Power receptacle
USB 2.0 host port
eSATA
eSATA host port
10/100/10000 Gigabit Ethernet port
Reset
System reset button
To reset the configurations (e.g. admin password and network settings), make sure the
power is ON and the system is running. Press and hold the reset button for 5-10
seconds and then release it. Wait until the system LED stops flashing before
attempting to login again.
To reset the device back to factory default, press and hold the reset button for 12
seconds and then release it. After the reset, it will be necessary to
the HOME and SWAP
can still be accessed by the admin, it will be necessary to recreate the previous user
accounts before the users can login again and access their existing data.
Power ON/OFF Procedure
Connect the power supply to your device first and only then plug it into the wall outlet. The system
starts up automatically as soon as you plug in the power supply. It takes about 1-2 minutes for the
device to go online but the blue system LED will indicate when the system is ready.
To safely turn off the device, press and hold the power button for about 4 seconds until the red LED
starts flashing. The system will then shut down all services and about 20 seconds later, it will power
down.
If for some reason the system is unresponsive, press and hold the power button for 6 seconds to
forcefully shut down the system and cut off the power.
http://wiki.myakitio.com/
mycloud_one
partition. Also, even though the private files of the other users
http://wiki.myakitio.com/mycloud_one
manually mount
Printed on 2020/11/30 23:29