Clearfield FieldSmart 48 Kurulum Kılavuzu - Sayfa 15
Raflar ve Standlar Clearfield FieldSmart 48 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Clearfield FieldSmart 48 18 sayfaları. Fiber distribution point (fdp) port outdoor wall box
Sayfayı Yazdır________________________________________________________
Cleaning the Ferrule
•
Lightly moisten the fiber optic swab (2.5mm/38542F or 1.25mm/38040)
by spotting a small amount (about 1") of Electro-Wash PX or
Electro-Wash MX pen onto the QbE. Hold the swab, 1 side down to the
wetted area and hold for a count of 1-2-3-4-5. (Figure 4)
•
Insert swab into side of ferrule, wet side to the ceramic ferrule and
circle around 2-3 times and remove. Turn swab to dry side and repeat.
(Figure 5)
Cleaning the Mate Through an Adapter AND the Adapter Itself
•
Lightly moisten the fiber optic swab (2.5mm/38542F or 1.25mm/38040)
by spotting a small amount (about 1") of Electro-Wash PX or
Electro-Wash MX pen onto the QbE. Hold the tip of the swab onto the
wetted area and hold for a count of 1-2-3-4-5.
•
Insert the swab into the adapter to the connector, press lightly against
the connector, twist 2-3 times, remove and discard.
•
Dry with a second dry swab.
•
Inspect, repeat cleaning if necessary, and test for signal strength.
•
Use additional swabs to clean inside the actual adapter. Moisten
swab, like above, and insert through hole and remove while twisting.
(Figure 6)
Direct: 763.476.6866 • National: 800.422.2537 • www.SeeClearfield.com • [email protected]
FieldSmart
Manual 020012 REV A - Aug 2018
Fiber Distribution Point (FDP)
®
24 & 48 Port Outdoor Wall Box
Installation Manual
Figure 4
Figure 5
Figure 6
15