Camlite Video Systems 1000 Kullanım Talimatları ve Garanti - Sayfa 5

Güvenlik Sistemi Camlite Video Systems 1000 için çevrimiçi göz atın veya pdf Kullanım Talimatları ve Garanti indirin. Camlite Video Systems 1000 7 sayfaları. Video/audio system

Sayfayı Yazdır
FULLY CHARGE YOUR BATTERIES BEFORE FIRST USE. For safety reasons rechargeable batteries are shipped in a discharged state. It may take several charging and
discharge cycles before the full capacity of the batteries is achieved. Because all rechargeable batteries gradually lose their power over time, if stored for more than a few days, a
top-off charge before use is recommended.
Dispose of the batteries properly and in accordance with local laws. DO NOT incinerate the batteries as it may cause them to explode.
DO NOT short circuit batteries. Be certain no metal objects such as coins, paper clips, keys, etc. touch the terminals. DO NOT attempt to disassemble, drop or mutilate the
batteries.

FCC Information

The CamLite contains an analog video/audio transmission system operating in the 2.4 GHz ISM band. The ISM band is an unlicenced band allocated by the FCC. Because the
transmitter is designated for PART 90 use, it requires a license to be obtained by the end user. Those licenses may be obtained by application with the FCC on the following
website: http://wireless.fcc.gov/uls/.
This device is FCC approved under FCC ID QIH-CL1. Any changes or misuse of the product may void the user's authority to operate the product.
In order to comply with the FCC exposure requirements, the antenna must be kept one (1") inch away from the body. The antenna is located on the front of the Camlite, directly in
line with the buttons (see diagram).
WARNING ! - Do not hold CamLite by the head when the transmitter is on. This will reduce the performance and violate the FCC RF exposure requirements.

Troubleshooting

Symptom
No function of flashlight
The batteries are quickly
discharged
The picture is not working
Cause and/or Corrective Action
Recharge the batteries
Replace the batteries
Replace the bulb
The operating temperature is too low
The batteries are not fully charged
Recharge the batteries
Replace the batteries
Check all of the connections at the
Integrated antenna
receiver
5