ESI CLIMB2-SLV Talimatlar Kılavuzu - Sayfa 7

Raflar ve Standlar ESI CLIMB2-SLV için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. ESI CLIMB2-SLV 10 sayfaları. Dual monitor sit/stand workstation

Sayfayı Yazdır

ASSEMBLY

Attach Monitors to VESA Mounts

• Hang the monitors on the VESA mounts.

— If the outer set of VESA holes was used (100mm apart), hang the two top screws in the open slots.

— If the inner set of holes was used (75mm apart), insert the two screw heads through the top inner holes

and hang the monitor from those screws.

• Attach the bottom of the VESA mounts using the remaining M4x12 screws and the 3mm Allen key.

• Tighten all screws securely.

Cable Management

After positioning the keyboard and mouse, organize

the cables. Cables must not interfere with product

operation or with the user's ergonomic enjoyment of

the unit.

• Remove the cable cover using a Phillips screwdriver.

• Re-install the cable cover with the monitor and

keyboard cables captured.

• Use the pole clip to route the cables down to the

CPU or power outlet.

3mm Allen Key

Cable

Cover

Pole

Clip

CLIMB2