ClearOne 910-3200-205 Hızlı Başlangıç Kılavuzu - Sayfa 13
Konferans Sistemi ClearOne 910-3200-205 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. ClearOne 910-3200-205 15 sayfaları.
Sayfayı Yazdır
- 1. Contact Information
- 2. Table of Contents
- 3. Components Included
- 4. Important Safety Instructions
- 5. The BMA CTH
- 6. Install the Components
- 7. Quick-Start Overview
- 8. Connect the Components
- 9. Component Connections
- 10. Test the Versa Pro CT
- 11. Compliance
- 12. Part Numbers
- 13. BMA CTH Isometric Diagrams
Quick-Start Guide
When you are ready to apply power, plug the PoE injector into a standard power
outlet.
Speaker Usage
When connecting 2x10 W speakers, each device requires its own PoE injector.
That is, if the amplifiers on either the Huddle CTH or the BMA CTH are used to
drive loudspeakers, both devices require their own dedicated PoE power injec-
tor.
When driving 2x10W speakers, set the "Power Select" switch to "PoE In".
Test the Versa Pro CT
Immediately after power is applied to the Versa Pro CT, the system uses Auto
Connect™ to recognize the system components, and Audio Intelligence™ to set
channel properties.
Note: The Versa Pro CT comes pre-programmed with default settings. Except
for custom installations, no programming is necessary.
Volume and Mute
Generally, when your computer is connected to the Versa Pro CT, the
conferencing software on your computer allows control of volume and mute.
10
QSG-0081-002v1.0 January 2021