ESi Ergo E-CMT-SLV Montaj/Ayarlama - Sayfa 3
Raflar ve Standlar ESi Ergo E-CMT-SLV için çevrimiçi göz atın veya pdf Montaj/Ayarlama indirin. ESi Ergo E-CMT-SLV 8 sayfaları. Monitor arm adapter for steelcase c:scape
Sayfayı YazdırAssemble the E-CMT Base
• Remove the clamp assembly from the Edge or Evolve base. Use a 4mm
Allen key to remove the three screws securing the assembly.
• Attach the E-CMT rail mount bracket to the monitor arm base with the three
screws previously removed. As before, use the 4mm Allen key.
Remove
Clamp
Assembly
• Peel the backing from the adhesive side of the
Teflon guide and adhere the guide to the bottom
of the assembled E-CMT base.
Attach Base Assembly to Rail
• Insert the flathead socket screws
into the two holes on top of the
rail mount bracket.
• Attach the square head nuts at to
the tips of the screws only.
IMPORTANT: The flat surface of the
nuts must be facing up, toward
the screw head. If not, they will not
lock into the rail.
E-CMT MONITOR ARM ADAPTER
Attach
Rail Mount
Bracket
Peel and
Adhere
3