Camoplast ATV T4S Kurulum Manüelleri - Sayfa 12

Traktör Aksesuarları Camoplast ATV T4S için çevrimiçi göz atın veya pdf Kurulum Manüelleri indirin. Camoplast ATV T4S 20 sayfaları. Atv track system
Ayrıca Camoplast ATV T4S için: Kurulum Manüelleri (14 sayfalar), Kurulum Manüelleri (19 sayfalar), Kurulum Manüelleri (15 sayfalar), Kurulum Manüelleri (16 sayfalar), Kurulum Manüelleri (17 sayfalar), Kurulum Manüelleri (13 sayfalar), Manuel (16 sayfalar), Kurulum Manüelleri (16 sayfalar)

7. Install the 2-in (50mm) thick spacer (15) over the

spacer already installed. Use lug nuts M10x1.25

(11) supplied. Refer to Figure 16.

NOTE: Use the torque that is specified for wheel

nuts by the vehicle's manufacturer.

Figure 16

8. Install the 1-in (25mm) thick spacer (17) over the

spacers

already

M10x1.25 (11) supplied. Refer to Figure 17.

NOTE: Use the torque that is specified for wheel

nuts by the vehicle's manufacturer.

Figure 17

Installation Guidelines / Directives d'installation

installed.

Use

lug

7. Installer l'espaceur (15) de 50mm (2 po)

d'épaisseur sur l'espaceur déjà installé. Utiliser

les écrous M10x1.25 fournis (11). Voir la Figure

16.

NOTE : Serrer les écrous de roue au couple de

serrage indiqué par le fabricant de VTT.

8. Installer l'espaceur (17) de 25mm (1 po)

nuts

d'épaisseur sur les espaceurs déjà installés.

Utiliser les écrous M10x1.25 fournis (11). Voir la

Figure 17.

NOTE : Serrer les écrous de roue au couple de

serrage indiqué par le fabricant de VTT.

Page 12