Camos CSA-2300M Kullanım Kılavuzu - Sayfa 2

Anten Camos CSA-2300M için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Camos CSA-2300M 7 sayfaları. Full automatic, auto-tracking satellite antenna

Sayfayı Yazdır

The Camos CSA-2300M / CSA-2400M enables reception on the move of the major

European satellites like ASTRA 2, ASTRA 1, HOTBIRD , SIRIUS, AB3, Thor and Hispasat.

If you want to watch TV or access the Internet via satellite, even when your vehicle is

moving, here's the equipment you need. The sat-dome is compact in size, light in weight,

reliable in operation and incredibly easy to operate and install: there's just one co-ax cable

to run.

Even if the in-motion facility isn't needed, the system's simplicity and neatness makes it an

attractive alternative to conventional dish systems.

Two sizes are available: both have the same diameter but differ in height. The larger

model (CSA-2400M) is designed for use in areas which are outside the central area of a

satellite's footprint.

1. Standard accessory

- Sat-Antenna CSA-2300M / CSA-2400M

- Control box incl. power cable

- 1 HQ co-ax cable (10m) with F-plug on both ends

- 1 HQ co-ax cable (1m, black)

- 1 Gel protection cap for F-plug

2. Installing your antenna

We basically recommend installing the CSA-2300/CSA-2400 with the

help of your professional dealer/workshop!

Pls pay attention that installing the antenna increases the height of your vehicle!

Important!

Pls absolutely keep to each individual point of mounting instruction!

General:

Pls take care of a suitable workplace, a garage or hall is better than a place outside. The

ambient temperature during sticking the antenna should lie within a temperature between

+5° C to max.+25° C. If you work outside avoid direct sunlight!

Always keep to the instructions dealing with chemical products.

Take care of necessary hygienic working conditions.

Preparation:

1. Assure that the roof of your vehicle is able to carry the antenna. If you are not sure pls

fix a metal plate (Alu, appr. 2mm thickness) onto the roof. Pls also ask the vehicle's

manufacturer.

2. Pls check completeness of parts.

3. Put the antenna on the selected mounting place on the car roof and adjust if

necessary. The mounting place must be even and no other roof constructions may

cover the reception area of the antenna.

Mark the outline of antenna feet with a suitable pen.

In case of problems (e.g. the roof is not even but has a curved form instead) pleas call

our hotline to arrange further steps.