ClearOne BMA CT Hızlı Başlangıç Kılavuzu - Sayfa 4

Mikrofon sistemi ClearOne BMA CT için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. ClearOne BMA CT 17 sayfaları. Beamforming mic array - ceiling tile
Ayrıca ClearOne BMA CT için: Kurulum Kılavuzu (2 sayfalar), Hızlı Başlangıç Kılavuzu (17 sayfalar)

Sayfayı Yazdır

BMA CT

THE BMA CT

The BMA CT is a 2nd-generation Beamforming Microphone Array

solution for ceiling-tile installations, featuring 24 microphones, and

beamforming and adaptive-steering technology (think of it as smart

beam selection) designed specifically for the CONVERGE

products: 128, 128D, 128T, 128TD, 128V, 128VD, 128VT, 128VTD, 120,

, 48T, 48VT, 48VTD, and 48V. The arrays connect with the CONVERGE

Pro 2 through a Peripheral Link (P-Link) port with either Regular (200 ft.)

or Long Distance (650 ft.) P-Link cables. Three arrays are supported per

CP2 via either regular or long-distance P-Link, and up to 6 arrays can be

daisy-chained in one regular P-Link chain with a stack of two CP2 mixers.

Power to the arrays is supplied through a Power-Over-Ethernet (PoE)

or P-Link connection from CP2. The array comes in both a 24-inch and

600mm size. There is also an adapter that converts the 600mm version

to 625mm.

IMPORTANT: The BMA CT arrays can only be used with CP2

systems. It is not compatible with CONVERGE Pro or first-

generation Beamforming Mic Array systems.

The latest version of the CP2 firmware and software can be found on the

ClearOne website at:

http://www.clearone.com/resource-product-line?pid=1029

The latest version of the BMA CT firmware and Installation Guide can be

found on the ClearOne website at:

http://www.clearone.com/resource-product-line?pid=1030

2 2

Pro 2 (CP2)