ClearOne BMA CT Hızlı Başlangıç Kılavuzu - Sayfa 10
Mikrofon sistemi ClearOne BMA CT için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. ClearOne BMA CT 17 sayfaları. Beamforming mic array - ceiling tile
Ayrıca ClearOne BMA CT için: Hızlı Başlangıç Kılavuzu (17 sayfalar), Kurulum Kılavuzu (2 sayfalar)
Sayfayı Yazdır
BMA CT
UPDATING ARRAY FIRMWARE
1.
Connect the P-Link cable between the CP2 units and the arrays.
2.
Connect the CP2 units with CONSOLE AI.
3.
Open the Firmware Loader screen.
4.
Browse for the BMA_CT_vx.x.x.x.mdo file.
5.
Download the array firmware.
6.
The array(s) will default and reboot after the download of firmware.
7.
Units are fully upgraded. (All array units connected via the P-Link on
the site are simultaneously updated.)
TESTING THE BMA CT UNITS
The BMA CT must be added to the site using the CONSOLE AI software.
This software also provides the capability of configuring the beams
(enable/disable) and other characteristics available in Configuration
mode. Refer to the online help available with the CONSOLE AI software.
V
& m
oLume
ute
These controls are available through the controller configured for your
CONVERGE Pro 2 site.
m
a
icroPhone
rray
The illuminated LED indicators on the face of the array change color
when the microphone array is active/muted. You can choose colors to
indicate either state, or even set the indicators to remain off by using
CONSOLE AI to change Unit Properties for the array.
8 8
Led i
ndicatorS