3form SimpleSpec 400.46-Divy Kurulum Kılavuzu - Sayfa 6
İç Mekan Mobilyaları 3form SimpleSpec 400.46-Divy için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. 3form SimpleSpec 400.46-Divy 12 sayfaları.
Sayfayı Yazdır
Ready To Go
SimpleSpec 400.46-Divy
Installation
1
Install Ceiling Anchor for the First Cable Assembly cont...
g
Hollow Substrate Installation
Metal
Studs
Drill Ø3/4" (19mm) hole. minimum
clearance behind wall = 17/8" (48mm)
j
Slide the plastic cap forward along the
legs until it is seated flush to the work
surface.
For more information, please visit 3-form.com or call 800.726.0126
September 2019 | mAN-rtG-400-46 | reV 002 © 2019 3form, Inc. All rights reserved.
h
position the metal channel parallel
with the plastic legs. Insert the metal
channel through the drilled hole into
the wall cavity.
k
Snap the plastic legs off flush at the
plastic cap by pushing outward.
tm
Installation Manual
i
pull the metal channel firmly against the
inner wall cavity by tugging the plastic
pull ring.
l
Note: maximum torque on screw or rod
is 5 ft-lb.
Metal
Studs
6