3form LightBox Hızlı Başlangıç Kılavuzu - Sayfa 9

Aydınlatma Ekipmanları 3form LightBox için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. 3form LightBox 15 sayfaları.

Backlighting

LightBox

Cleaning and Maintenance

Dust and debris can accumulate on the front and back of the

face panel and on the acrylic light guide panel behind the face

panel. This may cause a cloudy, spotty, or blotchy appearance

on the face.

In the absence of glass suction cups you can insert a small

flat blade screwdriver between edge of the face panel and the

aluminum frame. use a rag or cardboard to protect the frame

and face panel from scratches. Start about 6" from the corner.

For more information, please visit 3-form.com or call 800.726.0126

Solution Document

The face panel must be removed to access the acrylic panel

behind. The best method for panel removal is to use industrial

glass suction cups to adhere to at least one corner of the

panel and pull the panel loose from the Dual-Lock reclosable

fastener.

Pry outward to dis-engage the Dual-Lock reclosable fastener

at the corner. You may need to pry the face on both sides near

the corner to get the corner loose and open enough to grasp

with your hand.