Aimpoint CompM5b Kullanıcı Kılavuzu - Sayfa 8

Büyüteçler Aimpoint CompM5b için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Aimpoint CompM5b 20 sayfaları.

2.3 Remove / install ballistic turrets

To remove / install a ballistic turret:

a Set the installed turret to setting "1" ("A" Fig. 3).

b Push the locking tab in the direction away from the turret.

c While the locking tab is disengaged, remove / install turret.

NOTE: Only remove / install ballistic turrets when the locking tab is pointing to

setting "1" on the ballistic turret ("A" Fig. 3).

CAUTION: ALWAYS perform zeroing if the turret has been changed.

CAUTION: NEVER use the sight without ballistic or wind turret installed.

CAUTION: DO NOT turn the exposed mechanism when the turret has been

removed! ("B" Fig. 3).